Harbor Freight Tools 63123 User Manual
Harbor Freight Tools 63123 - 6.5 Amp Heavy Duty Tool-Free Variable Speed Orbital Jig Saw Manual
 |
View all Harbor Freight Tools 63123 manuals
Add to My Manuals
Save this manual to your list of manuals |
Harbor Freight Tools 63123 manual content summary:
- Harbor Freight Tools 63123 | User Manual - Page 1
Manual & Safety Instructions LASER CUTTING GUIDE Visit our website at: http://www.harborfreight.com Email our technical support at: differ slightly from the product described herein. Tools required for assembly and service may not be included. Read this material before using this product. - Harbor Freight Tools 63123 | User Manual - Page 2
injury. Addresses practices not related to personal injury. IMPORTANT SAFETY INFORMATION General Power Tool Safety Warnings Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and - Harbor Freight Tools 63123 | User Manual - Page 3
SAFETY SETUP Electrical safety 1. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with grounded power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. 2. Avoid body contact with grounded surfaces such as pipes, - Harbor Freight Tools 63123 | User Manual - Page 4
persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools in a hazardous situation. Service Have your power tool serviced by a qualified repair 2. Use clamps or another practical way to secure and support the work piece to a stable platform. Holding the work - Harbor Freight Tools 63123 | User Manual - Page 5
et seq.) 13. The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may a doctor and then have regular medical check-ups to ensure medical problems are not being caused or worsened from use. Pregnant women or people - Harbor Freight Tools 63123 | User Manual - Page 6
the grounding prong from the plug. Do not use the tool if the power cord or plug is damaged. If damaged, have it repaired by a service facility before use. If the plug will not fit the outlet, have a proper outlet installed by a qualified electrician. Grounded Tools: Tools with Three Prong Plugs - Harbor Freight Tools 63123 | User Manual - Page 7
. No Load Revolutions per Minute (RPM) WARNING marking concerning Risk of Eye Injury. Wear ANSI‑approved safety goggles with side shields. Read the manual before set-up and/or use. WARNING marking concerning Risk of Hearing Loss. Wear hearing protection. WARNING marking concerning Risk of Fire. Do - Harbor Freight Tools 63123 | User Manual - Page 8
use of optical instruments with this product will increase eye hazard. Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Note: For additional information regarding the parts listed - Harbor Freight Tools 63123 | User Manual - Page 9
SETUP Operating Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all pointing forward and the back of the Blade pressed against the center recess of the Guide Wheel. 5. Release the Blade Clamp Lever. 6. Pull the blade straight down with - Harbor Freight Tools 63123 | User Manual - Page 10
Knobs Figure 4 1. Loosen the Fence Lock Knobs. 2. With the main guide of the Rip Fence facing downward, slide the bar of the Rip distance from the Blade. 3. Tighten in place with the Fence Lock Knobs. Main Guide of Rip Fence Dust Collector CLOSED Figure 5 OPEN Dust Port Dust Blower Lever 1. - Harbor Freight Tools 63123 | User Manual - Page 11
SAFETY SETUP General Operating Instructions Adjusting the Cutting Speed Speed Dial Use the Speed Dial to set mode. 7. Allow the Saw Blade to reach full speed then rest the Baseplate on the workpiece and guide the Saw Blade into the workpiece. 8. Do not force the Jigsaw to cut faster than it is - Harbor Freight Tools 63123 | User Manual - Page 12
SAFETY Maintenance and Servicing Procedures not specifically explained in this manual must be performed only by a qualified Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use. Cleaning, Maintenance, and Lubrication 1. BEFORE EACH USE - Harbor Freight Tools 63123 | User Manual - Page 13
SETUP Troubleshooting Problem Possible Causes . 1. Forcing tool to work too fast. 4. Have technician service tool. Eliminate use of extension cord. If an extension cord is while blowing dust out of motor using compressed air. Laser Guide will not illuminate. 5. Motor being strained by long or - Harbor Freight Tools 63123 | User Manual - Page 14
OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES Blower Switch 54 Split Washer 55 Guide Wheel 56 Guide Bracket Fixed Pin 57 Cutter Lifting Bracket 58 Guide Wheel Pin 59 Dustproof Piece 60 - Harbor Freight Tools 63123 | User Manual - Page 15
Assembly Diagram Item 63123 For technical questions, please call 1-888-866-5797. 42 41 40 43 44 45 47 48 49 50 34 33 32 31 30 29 39 38 37 36 35 28 46 53 52 51 5455 56 22 21 20 19 18 17 16 1514 13 12 11 27 26 25 24 10 9 8 7 6 23 54 59 58 57 63 64 62 61 60 32 1 65 66 68 Page 15 - Harbor Freight Tools 63123 | User Manual - Page 16
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
 |
 |
Visit our website at: http://www.harborfreight.com
Email our technical support at: [email protected]
ITEM 63123
Copyright
©
2016 by Harbor Freight Tools
®
.
All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally.
Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
When unpacking, make sure that the product is intact
and undamaged.
If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Save This Manual
Keep this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures.
Write the product’s serial number in the back of the manual
near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and
the receipt in a safe and dry place for future reference.
Owner’s Manual & Safety Instructions
ORBITAL
JIGSAW
WITH LASER CUTTING GUIDE
Owner’s Manual & Safety Instructions
Save This Manual
Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures.
Write the product’s serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
When unpacking, make sure that the product is intact
and undamaged.
If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright
©
2016 by Harbor Freight Tools
®
.
All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally.
Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
REV 16b